Packaging scale instrument XK3201 (F701B) technical parameters: This controller can control many forms of quantitative scales, such as: bucket packaging scale, bucketless packaging scale, gap flow accumulation scale, bucket packaging double scale, with middle whole bag ton packaging scale, valve port scale, filling scale, etc. The weighing indicator is also called the weighing display control instrument, the weighing indicator is the weighing cell signal (or then through the weight transmitter) into the weight digital display, and the weight data can be stored, counted, printed electronic equipment, weighing instrument is often used in industrial and agricultural production in automatic batching, weighing to improve production efficiency. With the development of the economy, the application of load cells is becoming more and more extensive, and the safety maintenance of the corresponding instruments is becoming more and more important. Below, the editor of Zhongwanguan Hardware Machinery Power Grid will give you a detailed introduction to the relevant maintenance skills of weighing instruments.
1. Installation: Generally, the instrument should be placed in a clean, dry, ventilated and suitable environment with suitable temperature. The position of the instrument should be fixed and not moved frequently, otherwise it may cause the internal lead of the signal cable plug to fall off and cause failure.
2. Power supply: Weighing instruments (such as 8142, 8530 and other series) mostly use 220 volts AC power supply, and the allowable voltage variation range is generally 187 volts --- 242 volts. After changing the power supply line, remember to measure whether the voltage meets the requirements before powering on the instrument. If the 380 volt power supply is mistakenly connected to the meter, it may cause damage. When the power supply voltage fluctuates greatly, it should be equipped with a voltage regulator with good performance (such as CW type AC parameter regulator) to ensure the normal use of the instrument. Do not use the same power socket with strong interference sources (such as motors, electric bells, fluorescent lamps) to avoid unstable display values on the meter. Some instruments (such as HAWK meters, etc.) are AC and DC dual-purpose. When using dry batteries, it should be noted that battery leakage will damage the meter. When the battery is not used for power supply for a long time, the battery should be removed.